The USB interface 3.0 mother seat straight edge clamp 1.0 board has a total height of 11.5mm, and the USB mother seat AF3.0 clamp board 0.8 fishfork foot belongs to the AF mother seat under the USB3.0 series connector. In terms of appearance and structure, this USB mother seat is a clamp type, with double rows of pins arranged in 4-5, and both sides of the 9Pin pin are equipped with double fishfork fixed feet. The spacing between the fishfork foot and the 9P pin clamp board is 1.0mm. For the 9P pin, our company conducts a bending needle and K-pin treatment process, Improve the firmness of its clamping plate, on the other hand, It can also make the pin shape present the function of having a plug-in board guide port (similar to the common curling shape on USB motherboard, the main body length and other details of external dimensions can be directly checked in our PDF specification book. The material details are: the surface of the hardware shell is electroplated with nickel N plastic, which is environmentally friendly and high-temperature resistant LCP plastic, and can withstand high temperatures of reflow welding machines. The colloid color is blue, commonly used on USB3.0 connectors Due to the use of high-temperature resistant LCP plastic, its color and appearance are not very bright, appearing a bit dull. The 9P pin material is copper, and the surface of the solder end is tin plated to enhance solderability. The internal contact end of the interface is gold plated. In terms of electrical performance, a universal socket with a USB interface is a weak current electronic product, including the socket body, which is equipped with a USB mother base and a USB socket on the USB mother base There is a charger module, where the positive and negative poles at the output end are connected to the positive and negative poles at the power supply end of the USB socket, and the input end is connected to the power supply.